HOME/Articles/

[筆記] 在Ubuntu 18.04 下 透過 pgbarman streaming backup 備份 postgresql 10/ backup postgresql 10 with pgbarman straming backup in ubuntu 18.04

Article Outline

很久以前就有看到這個用來備份postgresql 的 pgbarman

https://www.pgbarman.org/

前幾天老闆在slack 上面又提到,所以這次就花了點時間來玩玩看

不過呢,雖然有弄起來,但是還真不知道有些問題是怎麼解決的...

<!--more-->

pgbarman 的備份有分兩種

streaming && rsync/SSH

原理就不說了,我一直沒搞懂 postgresql 的 streaming ..

依照官方網站上的說法,比較推薦 streaming 備份的方式

原因是,設定相對簡單,WTF !

On a general basis, starting from Barman 2.0, backup over streaming replication is the recommended setup for PostgreSQL 9.4 or higher
The reason why we recommend streaming backup is that, based on our experience, it is easier to setup than the traditional one

事實上呢,設定的確是很簡單,可是有個致命的缺點

Because Barman transparently makes use of pg_basebackup, features such as incremental backup, parallel backup, deduplication, and network compression are currently not available. In this case, bandwidth limitation has some restrictions - compared to the traditional method via rsync.

如果要做差異/增量備份, streaming backup 不能做

所以每次備份都是完整備份,也因此,barman server 需要準備很大的硬碟空間

以我測試的資料庫來說,一次備份,目前是133G ,如果一天四次,保留七天

就需要 133 x 4 x 7 = 3724G

咦,這樣看起來,其實也還好啦 XDD


現在開始設定的部份

設定 postgresql server

IP: 192.168.11.19 hostname: hqs019

在postgresql 建立相關帳號

streaming backup 需要先在postgresql Server 上建立一個具有 superuser 權限的帳號

以及一個用來做replication 的資料庫帳號

這裡就簡單帶過

sudo su - postgres
psql

create user barman with login superuser login password 'barmanpassword';
CREATE ROLE stream_barman WITH REPLICATION PASSWORD 'password' LOGIN;
鄉改 pg_hba.conf

然後修改 pg_hba.conf,加入底下兩行

# for barman test
host database_name barman 192.168.11.192/32 md5
host replication stream_barman 192.168.11.192/32 md5

當然,如果不考慮安全性問題, md5 直接改成用 trust ,可以省去一些麻煩。

修改 postgresql.conf

接著修改postgresql.conf

### for barman test 
max_wal_senders = 5
max_replication_slots = 3
wal_level = 'archive'
archive_mode = on

重起 postgresql service

設定barman server

IP: 192.168.11.192 hostname: barman

安裝 barman

barman 在18.04 中,已經被放到標準repository 中

所以只要直接

sudo apt install barman

就可以了

設定 barman.conf

安裝完成後,在/etc/barman.d/ 底下會有兩個範例檔案

streaming-server.conf-template
ssh-server.conf-template

複製 streaming-server 檔案

sudo cp /etc/barman.d/streaming-server.conf-template /etc/barman.d/hqs019.conf

內容如下

[hqs019]
description = "hqs019 "
conninfo = host=192.168.11.19 user=barman dbname=database_name password=barmanpassword
streaming_conninfo = host=192.168.11.19 user=stream_barman dbname=database_name password=password
backup_method = postgres
retention_policy_mode = auto
streaming_archiver = on
slot_name = barman

接著修改 /etc/barman.conf

[barman]
barman_user = barman
configuration_files_directory = /etc/barman.d
barman_home = /var/lib/barman
log_file = /var/log/barman/barman.log
log_level = DEBUG
compression = gzip
immediate_checkpoint = true
basebackup_retry_times = 3
basebackup_retry_sleep = 30
last_backup_maximum_age = 1 DAYS

基本上這樣就設定完成了

檢查設定

barman 有一些指令可以用來檢查目前的設定

barman show-server hqs019 可以看到所有的設定,這裡的 hqs019 跟 barman.d/hqs019.conf 裡面用"[ ]" 包起來的名稱要一致

barman@barman:~$ barman show-server hqs019
Server hqs019:
    active: True
    archiver: False
    archiver_batch_size: 0
    backup_directory: /var/lib/barman/hqs019
    backup_method: postgres
    backup_options: BackupOptions(['concurrent_backup'])
    bandwidth_limit: None
    barman_home: /var/lib/barman
    barman_lock_directory: /var/lib/barman
    basebackup_retry_sleep: 30
    basebackup_retry_times: 3
    basebackups_directory: /var/lib/barman/hqs019/base
    check_timeout: 30
    compression: gzip
    config_file: /etc/postgresql/10/main/postgresql.conf
    connection_error: None
    conninfo: host=192.168.11.19 user=barman dbname=database_name password=barmanpassword
    current_size: 142740768562
    current_xlog: 0000000100000264000000BA
    custom_compression_filter: None
    custom_decompression_filter: None
    data_directory: /database
    description: hqs019
    disabled: False
    errors_directory: /var/lib/barman/hqs019/errors
    hba_file: /etc/postgresql/10/main/pg_hba.conf
    ident_file: /etc/postgresql/10/main/pg_ident.conf
    immediate_checkpoint: True
    incoming_wals_directory: /var/lib/barman/hqs019/incoming
    is_in_recovery: False
    is_superuser: True
    last_backup_maximum_age: 1 day (WARNING! latest backup is No available backups old)
    max_incoming_wals_queue: None
    minimum_redundancy: 0
    msg_list: []
    name: hqs019
    network_compression: False
    parallel_jobs: 1
    path_prefix: None
    pg_basebackup_bwlimit: True
    pg_basebackup_compatible: True
    pg_basebackup_installed: True
    pg_basebackup_path: /usr/bin/pg_basebackup
    pg_basebackup_tbls_mapping: True
    pg_basebackup_version: 10.10-0ubuntu0.18.04.1)
    pg_receivexlog_compatible: True
    pg_receivexlog_installed: True
    pg_receivexlog_path: /usr/bin/pg_receivewal
    pg_receivexlog_supports_slots: True
    pg_receivexlog_synchronous: False
    pg_receivexlog_version: 10.10-0ubuntu0.18.04.1)
    pgespresso_installed: False
    post_archive_retry_script: None
    post_archive_script: None
    post_backup_retry_script: None
    post_backup_script: None
    pre_archive_retry_script: None
    pre_archive_script: None
    pre_backup_retry_script: None
    pre_backup_script: None
    recovery_options: RecoveryOptions([])
    replication_slot: Record(slot_name='barman', active=True, restart_lsn='264/BA000000')
    replication_slot_support: True
    retention_policy: None
    retention_policy_mode: auto
    reuse_backup: None
    server_txt_version: 10.10
    slot_name: barman
    ssh_command: None
    streaming: True
    streaming_archiver: True
    streaming_archiver_batch_size: 0
    streaming_archiver_name: barman_receive_wal
    streaming_backup_name: barman_streaming_backup
    streaming_conninfo: host=192.168.11.19 user=stream_barman dbname=database_name password=password
    streaming_supported: True
    streaming_wals_directory: /var/lib/barman/hqs019/streaming
    synchronous_standby_names: ['']
    systemid: 6688476041000599317
    tablespace_bandwidth_limit: None
    timeline: 1
    wal_level: replica
    wal_retention_policy: main
    wals_directory: /var/lib/barman/hqs019/wals
    xlogpos: 264/BA000F08

然後用 barman check hqs019 來檢查config 有沒有問題

barman@barman:~$ barman check hqs019
Server hqs019:
    PostgreSQL: OK
    is_superuser: OK
    PostgreSQL streaming: OK
    wal_level: OK
    replication slot: OK
    directories: OK
    retention policy settings: OK
    backup maximum age: FAILED (interval provided: 1 day, latest backup age: No available backups)
    compression settings: OK
    failed backups: OK (there are 0 failed backups)
    minimum redundancy requirements: OK (have 0 backups, expected at least 0)
    pg_basebackup: OK
    pg_basebackup compatible: OK
    pg_basebackup supports tablespaces mapping: OK
    pg_receivexlog: OK
    pg_receivexlog compatible: OK
    receive-wal running: OK
    archiver errors: OK
barman@barman:~$

那個backup maximum age FAILED 不用管他,因為都還沒跑過備份,這邊錯誤是正常的

其他都OK 的話,就可以開始備份了

barman backup hqs019

barman@ubuntu:~$ barman backup hqs019
Starting backup using postgres method for server hqs019 in /var/lib/barman/hqs019/base/20190823T082258
Backup start at LSN: 264/A10001A8 (0000000100000264000000A1, 000001A8)
Starting backup copy via pg_basebackup for 20190823T082258
WARNING: pg_basebackup does not copy the PostgreSQL configuration files that reside outside PGDATA. Please manually backup the following files:
    /etc/postgresql/10/main/postgresql.conf
    /etc/postgresql/10/main/pg_hba.conf
    /etc/postgresql/10/main/pg_ident.conf

Copy done (time: 1 hour, 6 minutes, 28 seconds)
Finalising the backup.
Backup size: 133.0 GiB
Backup end at LSN: 264/A3000060 (0000000100000264000000A3, 00000060)
Backup completed (start time: 2019-08-23 08:22:58.116372, elapsed time: 1 hour, 6 minutes, 28 seconds)
Processing xlog segments from streaming for hqs019
    0000000100000264000000A2

barman@ubuntu:~$ 

跑完可以用 barman list-backup hqs019 檢查

barman@ubuntu:~$ barman list-backup hqs019
hqs019 20190823T082258 - Thu Aug 22 17:29:26 2019 - Size: 133.0 GiB - WAL Size: 0 B (tablespaces: tablespace_a:/var/lib/postgresql/10/main/tablespace_A, tablespace_b:/var/lib/postgresql/10/main/tablespace_B)

要刪除的話,要加入 backupID

barman@ubuntu:~$ barman delete hqs019 20190822T171355
Deleting backup 20190822T171355 for server hqs019
Delete associated WAL segments:
    00000001000002640000009F
    0000000100000264000000A0
    0000000100000264000000A1
Deleted backup 20190822T171355 (start time: Fri Aug 23 09:36:43 2019, elapsed time: 3 seconds)

restore 的部份,暫時沒有測試,我想應該是要找時間測試看看怎麼還原才對

不過呢,前面有提到,用streaming backup ,每一次備份都是完整備份,非常的佔用空間、時間、頻寬

所以還是要來試試看用rsync/SSH 備份的機制